Showing posts with label salvage. Show all posts
Showing posts with label salvage. Show all posts

Sunday, 1 May 2016

Painting Gold

So painting gold is hard...really hard.  I have talked in another post about how I do small areas (chest plates, decorations etc) but when you want to do a whole mini that system breaks down.

I have to say, I can claim no responsibility for this way of painting gold...its pinched from someone else. Big props to Kenny Boucher at Next Level Painting for his guide, which I have modified to work with brushes not an airbrush.

So I used to have a metal Dante figure. I didn't really paint him that well, and the years have not been kind to him: 

Sad Dante

That horrible yellow-gold colour was achieved with a bright gold followed by a flesh wash (don't ask me how I remember the technique from over 20 years ago!). I don't really like that look, and I want my Dante to look like he's wearing some ancient aged brass armour. Kenny's method does this well, with a little modification.

So first things first, I stripped him off in Dettol. Then reattached his gun arm. The axe was problematic as it had snapped in the mid shaft. Basically I filed both ends off, drilled a 0.8mm hole in the dead centre of either end (with a pin vice) and then pinned it with a cut paperclip (my favourite pinning trick). I then pinned his foot onto a nice resin base I had lying around: 

Also primed in black

It turns out that the old metal sculps are a bit lacking on the detail front, and dont have the same depth of features as resin or plastic. This meant painstakingly hand painting in the details like abdomimal musculature to enhance their depth. Painful. 

So the next step was to paint the miniature in a bright silver (I used Runefang Steel) and apply a coat of Vallejo Model Air Copper (with a brush). In this context Copper is going to act as a 'dark gold', and the silver Base coat is to provide a really bright starting point.


The next step is to drybrush (quite liberally) Vallejo Model Air Bright Brass. As you can see I quite like these Vallejo metallics, and it was Kenny's tutorials that really turned me on to them. They are designed for airbrush, so are beautifully thinned and have great depth of coverage and pigment density. Another thing you will notice is that I never actually use a gold paint whilst painting this gold...


Next up is to try and increase the depth of darker tones, and this is done with a very delicate series of washes. The GW washes are ace, and carefully going from Seraphim Sepia to Agrax Earthshade and then down to Nuln oil gives an amazing result.  I then did a light drybrush of Bright Brass to re-establish the high tones.


The next step was the most important I think, and that is to reinforce the deeper tones with a very thin almost wash of burnt umber (vallejo model air range is my favourite...again). You need to be precise, it's almost like painting a very fine lowlight into the recesses. This took a while and a whole bunch of practice going up and down in tones until I reached this stage: 


Now clearly I have also painted some other details on at this stage as well. I have tried to keep a full on gold look, with as much variety of gold tones as possible (for practice as much as anything). I decided not to go with the white wings look, I don't think it matches the rest of my force.

So there it is, he still needs the finishing touches put on but is basically finished. I really enjoyed painting the gold tones, but it was much more time consuming than I had figured. Maybe down the line I will get some sanguinary guardsman...who knows.



Monday, 7 December 2015

Rhino WIP

Just a short post to show some WIP shots for my ongoing rhino restoration project. I just free handed the hazard stripes, my first time really experimenting with freehand techniques. I hope you like them...time to weather it down a bit now...



Monday, 30 November 2015

Dreadnought

This was the first miniature of my renaissance painting career! I used to love my old school metal dreadnought...None of my mates had one and it demolished everything else in 3e. He was looking a little worse for wear though; even when his torso sat upon his legs.


Not bad blending on the melta though! 

So he went for a Dettol bath, along with a bunch of my other 3e metal models.


Once cleaned down I rebuilt him as he was, adding only a resin base and a few little details that I picked up off of Bitzbox. I also drilled all of the gun barrels...something I am now doing with ally models.



Here is a few photos of him getting painted up, washed and highlighted. The recipie is exactly the same as I used for my devastators. The only difference here is that I tried to wet blend the panels to give them some tonal variation within the panels themselves. I also tried to narrow the pallet down a bit, to keep everything a bit more keyed in.



I hope you guys like it, as always feedback is gratefully received (just bear in mind this was the first mini I had painted in nearly 20 years!).

Wednesday, 28 October 2015

Retrospective: Devastator Salvage Job part 2

So part 2 then. This is what I had so far, base coated and now washed down to give some tonal depth to the mini. Next step is to increase the tonal variety even more by highlighting up.

My basic recipe for the various colours is as follows:

Red: restore the base colour to the plates, being sure not to disrupt the shading in the crevices. In this case that is with Mephiston Red, thinned down a bunch. Next I apply several more coats of Mephiston (always thin as you like) with the paint on the model still wet. This allows me to do a kind of wet blended effect to transition the reds up gently. Obviously each layer moves further and further from the crevices... 

Once I have pure mephiston on I move to the next shade up. This is super thin Evil Suns Scarlet. Same process again, but keeping in mind how far I wanted to take it (I like the grimdark look). Very final tickle is with Evils Sun's scarlet mixed 80:20 with a yellow...This is literally for the very tips where the light catches. 

I find it quite useful to have a photo of your model to work from when highlighting.  This means you can do some 'objective source lighting' (i think thats the right term) type highlights and make it all look a bit more convincing.  To do this I take a photo of my model just after priming in a dark room with only one light coming down from on top. It will really show you where the shadows fall and what surfaces catch the light.

Other highlight colours I use are:
Leadbelcher to reinforce the silver areas, followed by runefang silver on the very edges.

Gehannas gold to reinforce, and then a highlight of Gehannas and a brass (50:50). Final top highlight of brass and runefang (50:50)...obviously a softer transition if doing a big area...I will do a gold post a bit later on.

Edge highlight of the blacks with 50:50 black and administratum grey. I keep these quite tight to avoid the blacks looking too grey.



So there we go then....the captain is done.  In this shot the base is this fairly dreadful one...so I have changed it to key in better with my other guys, and also because darker bases tends to 'frame' the mini a bit better.  I will hopefully do a bit on basing another day..along with a bit on how I paint the gems. 

Bye for now.

Monday, 26 October 2015

Retrospective: Devastator Salvage Job part 1

This is my first salvage post, about minis that I am trying to bring back from the dead. I hope other beginners might find it a useful (and cheap) way to update their lists. I won't go into too much detail, but I will try to point out the pitfalls...hope you enjoy.

So back in the day I had some devastators, led by my fave captain:

Needs some love

They're all metal or plastic/metal minis, so I did the 'Dettol' trick. Basically brown Dettol (disinfectant) is an ace acrylic paint stripper...it's also cheap, safe and available from most hardware shops.  However, tip 1 is that it stinks to high heaven...my wife was furious with the smell in the house, so just do it outdoors.

Dudes taking a Dettol bath

I left them in 24 hours, and the paint just flies off with a tooth/paintbrush. Metal seems to strip better than plastic, so you may need longer for plastic guys. There are reports that you can leave minis in almost forever and they won't degrade...the longest I can testify to is about 48 hours.  Also, DO NOT DO THIS WITH FINECAST. It will literally melt your models. There are a ton of other strippers about,  but this one works for me...


Stripped and on first attempt bases...I went off of these early on.

Onto paint then...I prme in black spray as it hides mistakes better than anything else...and boy do I need that.  I would totally recommend that everyone primes black, especially when you're starting out (sensible exceptions of course...). Then over sprayed in Mephiston red and base colours put in (leadbelcher, black, gehannas gold, hashut copper) with the brush.  I have picked a fairly narrow pallet for my Blood Angels, as you will see...this is to try and tie it all together a bit. Tip 2: never paint gold onto red (especially not GW golds as they are not heavy in the pigment department). ALWAYS put an undercoat on first.  I use Snakebite Leather, but any dark colour will do (bear in mind you will see the undercoat though the finished gold).  If you want a brighter finish then a silver base (Runefang Steel) is also good.

Tip 3: ALWAYS thin your paints. I used water at this stage, but I am experimenting with medium too...will keep you posted.


So they're back to pretty much how they were, except painted within the lines this time.  The fun starts now, with the washes. I use a combination of washes to get my tones really deep. For the metal areas I used Nuln Oil, followed by a go with Agrax Earthshade (let them dry super loads between coats).  For the rest (literally everything else) I use Seraphim Sepia to key everything in nicely, and then Agrax Earthshade to get the crevices nice and dark.  Tip whatever (I lost count): direct your washes. Use a brush to get the wash into the recesses, and don't let it pool. Avoiding plates of colour can also save you time in the highlighting stages.

Clearly this is a different model...same stage though.  My phone has deleted many of my WIP shots...sorry!

So now the minis are pretty much table top I reckon...time to push on.  Highlighting takes forever and can be a proper pain, but if you stick with it you can get some super subtle effects. I'm gonna put the rest in another post because this got a little long...adios.